Measuring the Spread The spread is the distance between the 2 outer holes of your faucet. So, once you have pulled your existing faucet out, there should be 3 holes. One hole is for the water, and 2 for the handles or knobs. You want to measure the distance between the handles or knobs, from furthest end to end.

.

Likewise, how do you measure a faucet spread?

Measure the distance between the handles. Hold the the tape measure above the faucet if it's in the way. If the distance is six inches or more you need a “widespread" or “eight inch spread" faucet.

Furthermore, do all faucets fit all sinks? Not all faucet types work with every sink, so it's important to make sure the faucet you choose will fit your sink or basin. Standard faucet drillings are centerset, single-hole or widespread.

Subsequently, question is, how do you measure a faucet for the kitchen sink?

If you have windows or cabinets above your sink, measure upwards from the center mounting hole to find the maximum overall height and ensure your new faucet can fit comfortably underneath. To find the ideal spout reach, measure from the center mounting hole forward to the center of your sink.

What does a 4 inch centerset faucet mean?

4" Centerset Faucets, are intended for sinks and countertops with 3 predrilled holes that are 4" apart. Centerset faucets sit on a deckplate which connects the two handle bodies with the spout body.

Related Question Answers

Will any kitchen faucet fit my sink?

There are many different kitchen faucet and sink designs available, but they're not always compatible. If you're installing a single-handle faucet into a sink with three holes, the deck plate will usually cover up the unused openings.

What does an 8 inch center faucet mean?

A 4″ measurement means you should look for a 4″ Centerset faucet or 4″ Minispread faucet. An 8″ measurement means you should look for an 8″ Widespread faucet. 4″ Centerset faucets are compact and join the three hole openings above the sink or countertop.

Are faucet holes standard size?

All tap holes are standard sized at 1 3/8 inches wide, but some faucets require a 1 1/2 inch hole. Tap holes are spaced apart 4 inches on center for center set faucets, and 6 to 8 inches on center for widespread faucets. Widespread faucets are named so because the handles are spaced wider apart.

How do I know what size faucet to buy?

Bathroom faucets connections are generally standard four inches on center of the outside holes. Any bathroom faucet will fit. If you buy a double handle faucet it will have two pipe connections on the outside. The center hole is for the drain lift rod.

What is faucet spread?

A widespread faucet is generally for larger sinks because it allows for more room between the faucet handles and spout than a centerset faucet. The 'Spread' is the distance between the faucet mounting holes. Usually centersets are single or four inch spacing between holes, while a widespread is wider.

How much space do you need for a faucet?

When more than one hole is required, you'll find the required hole spacing in the product specifications, or you can measure the distance between faucet's tailpieces yourself. It's typically 4 inches between handles or between the spout and the handle for bathroom faucets and 8 inches for kitchen fixtures.

What is the difference between widespread and centerset faucets?

In many cases, but not all, centerset faucets combine the handles and spout together on a base unit. This configuration works well in small bathrooms with small sinks and limited space. A widespread faucet has hot and cold water handles that are independent of the spout and at least 6" apart.

Can you replace a 2 handle faucet with a 1 handle faucet?

A single handled faucet has a faceplate that simply stretches across to cover the other two holes that aren't in use. So, you can replace a single-handled faucet with a double-handled faucet or go the other way around, but can you do it on your own?

How do I choose a sink faucet?

Tips on Choosing a Faucet
  1. Looks aren't everything. Most people choose a faucet based on looks alone.
  2. Spend enough but not too much.
  3. Watch the spout height and reach.
  4. Choose ceramic valves.
  5. Some finishes are tougher than others.
  6. Count the holes in your sink.
  7. A single handle is more convenient.
  8. Pull-down sprayers are better.

Do you need a special faucet for an undermount sink?

Undermount sinks mount below the countertop's surface but on top of the sink cabinet using special clips and caulking sealants. The result is a smooth, no-lip installation for a clean, modern look. Each sink is sized to work with existing countertops and faucets, so no special sizing is required.

How far should tap be from sink?

The average washer/seat size of a tap is 49mm in diameter, meaning that the minimum distance from the edge of the worktop sink cut out to the centre of the tap hole would be approximately 50mm.

What is spout length?

Spout reach is measured from the center of the spout base horizontally out to the water stream. Spout height is measured from the sink/countertop surface vertically up to the highest point. Refer to the specification sheet for your faucet for specific measurements.

How much does it cost for a plumber to replace a faucet?

In your area, expect to pay at least $150. In other parts of the country, the price can range from $114 to $189. If your job includes removing an old faucet before installing the new one, expect to pay $225 to $275 or more, depending on whether or not your plumber needs to adjust water lines.

Why are bathroom faucets so short?

The primary purpose of the sink is to put things in, not to put water in. It would be harder to put things into and pull things out of the sink if the faucet was over the middle of the sink. The short faucets tend to be the cheapest, so contractors like to go with those if they can get away with it.

How tall should your kitchen faucet be?

High-arc (aka "gooseneck") faucets are typically 8 or more inches tall: ideal for those regularly handwashing large pots and pans, or who simply want more space to work with above the rim of the sink.

What is spout projection?

Projection – This is the measurement of the faucet spout's reach into the sink and from side to side as it swivels (see red notations). For an ideal installation, the faucet spout should line up with the center of the sink drain so that when the faucet operates, water flows into the drain.

Do high arc faucets splash more?

In general, the taller the faucet, the greater chance of splashing particularly when you're washing vegetables or your hands, Smith confirmed, because this usually takes place in the working space above the sink rim. “If you have a very shallow sink you don't want a high arching spout with a 9 to 10-inch height to it.”

Are faucets hard to replace?

Replacing a leaky or outdated faucet isn't as difficult as you might think. You can tackle the project with a basin wrench and a few other common tools. It should usually take no more than about an hour. The same steps apply if you're installing a new faucet onto a new sink.

Do all bathroom sinks have 3 holes?

Sinks generally come in one of three configurations: 6”, 8”, and 6”-16”. The faucet will cover the holes in most of these configuration. You will need to measure the width between the outer holes or estimate it by measuring the width of the deck plate. A 3-hole sink is very common in bathrooms.