Supply Cost Professional contractors at Backyard by Design estimate that Kool Deck costs roughly $3 to $4 per square foot when installed over existing concrete.

.

Consequently, how much does SunDek cost?

SunDek should be between $3-$4 per sq.

One may also ask, what is cool deck coating? COOL is a revolutionary and proprietary new coating from Encore that repairs, enhances the look of your concrete pool deck while reducing heat build-up by as much as 38%. Cool can be applied over existing concrete pool deck surfaces, including Kool-Deck.

Likewise, people ask, how much does a new pool deck cost?

On average, building a pool deck costs around $5,000. Most homeowners pay between $3,000 and $12,000 for this project. Where you fall on that range depends on the materials you choose, the size of the patio, and the difficulty of the terrain. A simple wood deck for an above-ground pool may only need a $3,000 budget.

How much does it cost to put concrete around a pool?

The average cost of stamped concrete around an inground swimming pool is $9–$13 per square foot (depending on region). The average size of a stamped concrete pool patio in most areas is 500–900 square feet.

Related Question Answers

How long does Sundek last?

10 to 15 years

How long does it take for a cool deck to dry?

Kool Deck® surfaces need sufficient time to cure. The owner should avoid contact with the deck for 48 hours, light walking traffic after 3 days; normal walking traffice after 14 days; heavy patio furniture after 28 days. Do not allow the PTA Bonding Agent to dry before applying the Keystone Kool Deck mixture.

What is pool deck resurfacing?

Concrete pool deck resurfacing can spice up your old pool deck without the hassle of tearing out the old concrete and pouring new. Concrete overlay products can be sprayed on or trowel applied to most sound concrete surfaces to add color, texture, and slip resistance.

How do you resurface a concrete pool deck?

  1. Introduction. Prepare the Area. Clear furniture or other movable items out of the area.
  2. Pressure-Wash the Surface. Once all of the concrete patches are dry, pressure-wash the entire deck surface.
  3. Stain the Pool Deck. Once the stain is dry on the coping, work with the professional to mask off the coping.

What is Sundek?

SUNDEK is an Acrylic Decorative Concrete Coating designed to beautify old or new concrete surfaces.

How do you clean Sundek?

  1. Regular cleaning of Sundek by hosing and using a squeegee or push broom to remove standing water is the most effective method of minimizing most stains.
  2. Mix 50% pool chlorine to water.
  3. Rinse the area with water.
  4. Freeze with dry ice or CO2 type fire extinguisher and chip off with putty knife.

What is best material for pool deck?

Swimming Pool Decking Materials
  • Concrete. Poured concrete is the most popular – and usually most affordable – pool decking material.
  • Wood. Wood is another popular decking material.
  • Stone.
  • Pavers.
  • Tile Deck.

What is the best deck material to use around a pool?

Poured concrete has been the material of choice for pool decking for decades because it's durable and water-resistant.

How much decking should I have around my pool?

According to the Swimming Pool Ideas website, pool decks should be at least 4 feet wide. Pool decks that are at least 4 feet wide provide a safe surface for entering or exiting the pool. Municipal codes for residential pool deck generally require 4 foot wide decks.

How much would it cost to build a deck around an above ground pool?

The cost to build a deck around an above-ground pool is $15 to $30 per square foot depending upon the design and materials used. The deck alone can range from $2,800 to more than $10,000 installed, or buy a small deck system/kit that's easy to put up as a DIY project for $800 to $3,000.

How do you build a deck over a pool?

How to Build a Deck Over an Empty Pool
  1. Assess the pool for safety.
  2. Determine the dimensions of your deck.
  3. Lay a 2-by-8 on edge the length of the pool on the patio or pool deck.
  4. Add 2-by-8 legs in the center of the pool, from the bottom to even with the top of the joist, about every third joist.
  5. Place your decking, starting in one corner.

How much does an above ground pool cost installed?

Installations for Above Ground Pools The installation costs of above ground pools usually run $1,000–$3,000, depending on the size and type of pool. Keep in mind that oval pools normally cost more to install than round pools, and the kits are also more expensive.

Does Kool Deck contain asbestos?

Kool Deck has asbestos in it and therefore must be removed by a professional. We plan on taking the deck out as far as we can (in wide step down areas so as to avoid having to use rails for safety) and still use the pool cover in the winter. The pool has about a 3 foot Kool Deck covered concrete decking around 3 sides.

What is cheaper poured concrete or pavers?

While concrete is usually cheaper than pavers at installation, pavers require less in terms of long-term maintenance. As a result, concrete can potentially be more expensive over time than pavers, depending on the environment.

How much does it cost to pour a 24x24 concrete slab?

Average Cost To Pour Concrete To pour a typical 10x10 concrete slab will cost $670 to $930, a 12x12 slab for a patio will cost $796 to $1,476, a 20x24 driveway slab runs between $1,440 and $3,360, and a 24x24 slab for a garage will cost $3,058 to $5,944.

What is the concrete around a pool called?

The hardscape area around your swimming pool is called a surround, deck, or decking, even though it isn't always made of wood or composite, like traditional outdoor decks with which we most often associate the words. Traditionally, most in-ground swimming pool decks are made of concrete.

Is stamped concrete around pool slippery?

The combination of pools and stamped concrete doesn't necessarily spell disaster. For one thing, when a stamped concrete surface near a pool is slick, a topical sealer, not the texture, is often the culprit.

How thick is concrete around a pool?

To be structurally sound, a concrete pool shell should generally be 6 inches thick. Depending on the engineer and the soil condition, it may be more. (On top of that, the plaster interior finish should be at least ? inch thick.) The pool will also need to meet the ANSI/APSP standards.