How to Move a Sprinkler System Line
  1. Lay out the location for the new sprinkler line.
  2. Turn the water to the system off.
  3. Dig a trench to remove the old line and a trench for the new line.
  4. Cut the old pipe where it needs to be moved using a hacksaw or PVC cutters.
  5. Install the new pipe and fixtures using PVC cement.

.

Herein, is it easy to move sprinkler heads?

Any head can be moved by as much as four feet using flex pipe, which you can find plumbing and irrigation store. If you are relocating your sprinkler head more than a few feet away, consider using painting tape to outline your route before you start digging the trench.

Similarly, how do I stop my sprinkler lines from digging? The map should indicate where the underground sprinkler lines are laid between those heads. Mark along their path with flags so that when you're digging, you can steer clear of the line. Avoid the flag line by six inches on each side, just in case.

Additionally, how much does it cost to move a sprinkler head?

Sprinkler Repair Costs Replacing sprinkler heads runs $2.50 to $18 per head for most types, plus a range of $50 to $100 per hour for labor by a professional plumber. Valve replacement averages about $12.50 to $40 per valve in addition to labor.

How do I permanently remove a sprinkler head?

Steps

  1. Find or purchase a sprinkler cap or plug that is compatible with your system.
  2. Turn off the water to the sprinkler system.
  3. Clear the dirt around the sprinkler head.
  4. Remove the cap from the sprinkler head.
  5. Screw the new cap onto the sprinkler head.
  6. Refill the hole and turn on the system.
Related Question Answers

How do you remove a sprinkler system?

Removing sprinklers. To remove a sprinkler you can sometimes just grab the top of it and turn it counter-clockwise. It will unscrew from the pipe below it and then you can lift it out of the ground. Often you will need to dig away grass from it so you can twist it out.

What is the best traveling sprinkler?

The best traveling sprinklers
  1. Nelson tractor sprinkler. Used mainly for lawns, there are three speeds for adjusting watering.
  2. Orbit tractor sprinkler.
  3. John Deere traveling sprinkler.
  4. RainCoach Self-Propelled Traveling Sprinkler.
  5. YeStar Lawn Sprinkler System.

How much does it cost to redo sprinkler system?

The average cost to repair your sprinkler system is $75 to $250, with most homeowners paying $212. Most sprinkler repairs involve replacing sprinkler heads at $5 to $20 per head, or replacing valves at $20 to $40 per valve, not including the cost of labor of about $75 an hour by a professional plumber.

How much does a sprinkler system cost per zone?

Bearing in mind these cost factors, the average cost of a professionally-installed lawn irrigation system is $500-$1,000 per zone, or around $2,500 to $5,000 for a typical ½ acre lot. Note, however, that zones are, proportional to the entire system cost, cheaper to install.

How do I find my sprinkler lines?

As others said, find the sprinkler heads (where the water sprays out) and if you mark them on a diagram of your lot you probably will see a pattern and be able to tell where the lines are. The lines should be in straight lines between the valves.

How do you find a hidden sprinkler head?

Use a metal detector to find buried sprinkler heads. Many valves have metal parts you can locate by running the metal detector over the surface of the ground. Valves are located directly under sprinkler heads.

How do you adjust sprinkler heads?

To increase the arc of your Hunter rotor head, you'll want to insert the plastic key into the adjustment socket, which can be found on the top of each sprinkler head. Turn the adjustment wrench clockwise in a full 360-degree motion. This will increase your arc by 90 degrees each time you turn the wrench a full circle.

Why do sprinkler heads stay up?

Most pop-up sprinklers have springs that pull them back into the ground when there is no water pressure. If one of them won't retract, it's usually because some dirt or debris has lodged between the riser and the sprinkler body and is preventing the head from sliding smoothly.

Why do sprinkler heads not pop up?

-- When a sprinkler head is clogged with dirt or other debris, it will soon fail to rise completely out of the ground. -- A leak in the water line can cause low water pressure and keep water from flowing to the sprinkler head. If water doesn't reach the sprinkler head, then it won't pop-up out of the ground.

What is a pop up sprinkler?

The main purpose of any garden sprinkler system is to provide uniform water to all plants. Sprinklers, called pop-ups, appear from hidden, underground receptacles to water your garden and lower back into the receptacle after the water is turned off.

How do I keep my sprinkler heads straight?

Remove 1 to 2 feet of sod around the irrigation head with a shovel and set it aside. Dig down around the crooked sprinkler head with the shovel, taking care to avoid damaging the sprinkler head or riser. Remove enough dirt to access the base of the riser supporting the head.

How deep should sprinkler heads be?

The depth should be around 6-8 inches to give you some room to work. Carefully lift the grass around the sprinkler head and flip it upside down on the lawn. With a small trowel, remove the dirt from around the sprinkler head taking care not to hit the sprinkler line. Dig deep enough to unscrew the head.

How do you fix a sprinkler head that won't rotate?

How to Do It
  1. Disassemble the sprinkler head.
  2. Take off the filter at the bottom of the head.
  3. Rinse the filter in a bucket filled with clean water to wash out debris.
  4. If this doesn't work you'll need to have the sprinkler head replaced.
  5. If it does work, make sure the head is properly adjusted when you re-install it.